An In-depth Look at Fluorescent Lighting
What is Fluorescent Lighting?
LED fluorescent retrofit lamps are commonly found in interior areas such as office buildings, retail, industrial and warehouse spaces, as well as education and medical facilities. The non-LED fluorescent lamp is a gas-discharge lamp. Using a process known as inelastic scattering, electricity emitted from cathodes excite mercury vapor contained within the glass. Also included within the glass are phosphors and a noble gas, which glow when the mercury atoms produce ultraviolet light, thus creating a visible light source. (Warning on Mercury Poisoning)
Most fluorescent lamps are installed in troffers or surface mounts and contain 1-8 lamps per fixture. The size, light color, and wattage of fluorescent lamps vary greatly, with the most common attribute being the application is mounted in/or hanging from the ceiling. Fluorescents are either T8, T12 or T5 lamps, and are generally mounted in troffers, surface mounts, vapor tight, and high bay applications.
Below are a few visual examples of lighting applications that are utilizing fluorescent lamps.
Common Issues with Fluorescent Lighting
While the cost of a fluorescent lamp is lower than most lamps. All fluorescent fixtures operate with 1-8 lamps per fixture. Causing multiple concerns if a single lamp is having performance issues within the fixture.
You can learn more in Today’s Options for Fluorescent to LED Conversion.
The typical wattage usage of a 4ft fluorescent lamp is between 28-40 watts per lamp. For example, if your facility is utilizing 2×4 troffers, then you are operating 4 fluorescent lamps and consuming up to 160 watts of energy per fixture. The electric cost for a single 2×4 troffer will run you $85 per year. Multiply that by the total number of troffers in your facility and your energy costs are through the roof.
Depending upon the type of lamp you are utilizing (T8, T12 or T5). You could be experiencing a wide variety of lighting performance issues. Like we stated above, the T12 and T8 fluorescent tubes are the most common lamps used in facilities today. Most people would assume that the performance of these two types of fluorescent lamps is very similar. Unfortunately, they would be wrong. Even the manufacturer can play a huge difference in performance quality between the same types of lamps. To make matters worse as individual lamps fail, the aesthetics and performance of that fixture are diminished.
The maintenance volume for fluorescent lighting can also vary greatly. Cold temperatures as well as continually switching your lamps on/off, can cause rapid deterioration. Every time you turn a fluorescent lamp on, it degrades the ignition system within the tubes causing a much shorter lamp life. The average life span of a fluorescent lamp is between 10,000 – 30,000 hours. For a single moderate office space, your maintenance costs can easily reach over $1000 per fixture, per year.
The Benefits of an LED Retrofit for Fluorescent Lighting
There are substantial benefits to performing a fluorescent to led conversion. Light Emitting Diodes or LED’s generate light utilizing a semiconductor. They do not rely on the consumption of a fuel source like a fluorescent lamp. One of the great aspects of performing an LED fluorescent retrofit, is that the much more efficient LED can be retrofitted into your existing lighting application.
For more information read our eBook: Replacing Fluorescent Lamps with LED Fixtures or Linear LED Tubes.
We would like our readers to be mindful, that the quality of an LED depends significantly upon the manufacturer. We suggest contacting a product-neutral service provider to help with your LED selections.
Check out our blog, Buying LED: A Buyers Guide to Understanding LED Lighting Specs.
Most LED lighting applications range in wattage usage for 22-50 watts. Which can result in a 40% – 60% reduction in energy consumption. By performing a t8 to LED Retrofit, your organization could save $80 per fixture, per year in energy costs.
As a result of an LED fixtures multi-point design, you will see a bright evenly distributed light pattern perfect for illuminating indoor workspaces, no matter the size. While a fluorescent lamp is not dimmable. Your LED will be adjustable to suit your lighting needs at any given moment. As an added bonus, LED’s are available in a wide range of CCTs (Correlated color temperature) and with their high CRI (color rendering index), you are looking at illumination suitable for any location and occupant.
Due to the way LED’s generate light their functional lifespan is much longer than a fluorescent. An LED’s generated light output will degrade very slowly over time. As a result, an LED lifespan can range from 50,000 – 150,000 hours. The LED’s lifespan drastically reduces the costs associated with maintaining your lighting. With the fact that LED’s are not affected by constantly switching them on/off. You can save up to $1000 in maintenance costs for one fixture over the course on a year.
For more on an LED’s lifespan, check out our blog, Understanding LED Lifespan.
More LED Lighting Resources to Explore
LED Retrofit Education
When narrowing down the best solution for your organization, you will find it to be a challenging endeavor. Because of the thousands of lighting options available in the LED Industry, not all of them offer the same results. With this in mind, we have created an in-depth look at LED retrofits that covers things like;
- What is a turn-key commercial LED retrofit?
- Examples of commercial LED retrofit goals.
- LED lighting Performance
- Commercial applications
- LED energy savings
- LED maintenance Savings
- And so much more!
LED Back Lit vs LED Edge Lit Panels
Transitioning from fluorescent troffer lights to LED panels comes with benefits. The lights are eco-friendly and help save money on energy costs. You also get improved light quality. However, you probably have plenty of questions, and today we are going to focus on deciding between LED edge lit panels and back lit lights.
In this article, we will look at the between the 2 products, the benefits and disadvantages, the lighting performance, and more.
Replacing Fluorescent Lamps with LED Fixtures or Linear LED Tubes
Replacing Fluorescent Lamps with LED Fixtures or Linear LED Tubes is one of the most cost-effective lighting upgrades on the market today. One of the most common lights used to illuminate large buildings like warehouses, schools, and corporate offices over the last several decades has been the linear fluorescent tube. Many facilities are already configured with recessed troffers that fit the standard dimensions for linear fluorescent lights.
In this e-book, you’ll find everything you need to know before starting a fluorescent to LED lighting project.
Determining Next Steps in an Fluorescent to LED Retrofit
So, you have established an LED Fluorescent Retrofit is the right decision for your organization. Now the big question is, what are the next steps in the process? We have a few considerations for you to review.
Commercial Lighting Service Provider
Consider partnering with a project management provider. Make sure they can supply a national LED lighting and electrical project management program. Review these items when vetting a national LED lighting and electrical service provider.
Interested in Learning More about a Fluorescent to LED Conversion?
The first step in any fluorescent to LED conversion project should be to contact a lighting solutions provider or lighting company. Make sure they are manufacturer and product-neutral. With neutrality comes a higher focus on your needs. As opposed to the desire or limitation of selling a specific product, purchasing from one distributor or electrical supply house.
A LED Retrofit provider should ask you about your project.
- What are your desired results?
- Are you looking at budget or project completion constraints?
- Do you have an energy reduction target?
- Do you have lighting performance specifics?
At Action Services Group, our business model is designed to offer you the maximum ROI. While taking your lighting performance, maintenance cost, and energy efficiency into consideration. This allows us to help you prioritize your product selections based on your unique performance goals. No solution or product is ever a one size fits all. We understand the need to customize solutions to meet the organization.
Action Services Group Services
Action Services Group Solutions
Blogs You Might Be Interested In
Effective office lighting does more than illuminate a space. Modern lighting systems are also about triggering positive feelings that positively impact employee productivity and morale. Boosting productivity often provides a greater return on investment (ROI),...
Some facilities waste up to 30% of their energy usage on inefficient processes. It’s one of the reasons intelligent buildings are becoming more common. Engineers are designing buildings to use their physical spaces more sustainably. Here’s a look at what intelligent...
An electrical project management company often works on challenging projects, whether they are residential, commercial, or industrial. The company must also employ a skilled electrical project manager. The skills required include strong communication and leadership...
News You Might Be Interested In
LEDs are becoming one of the most popular bulb choice due to their energy conserving abilities and adaptability. One of the main selling point about LEDs is how long-lasting they are, and it requires less maintenance for facility managers to have fixed or replaced....
A new microgrid was unveiled in Columbus, Ohio which is functioning off of a solar field near their water towers. The purpose of the microgrid is to keep a local water boosting station fully functional in the event of a power-outage. This has been a nearly 3 year-long...
A small town in California is the first town to be fully powered by a solar and battery microgrid. Each home is fitted with a solar panel system, backup battery storage, electric heater and water heater, and a main control panel, and EV charging capabilities. The...
Join Our Community
Thousands of business professionals rely on Action Services Group for the latest in Lighting,
Signage, and Electrical news. Add yourself to our community and receive timely updates on
safety, new products, energy savings, rebates, and so much more.
You can select what information you would like to receive.